AO 3D plastic printed armboards for the Ariston RD80 turntable
Available in BLACK or SILVER.
Only £9.99 each and postage UK £4 or worldwide £8
SME – REGA – SYRINX/LINN – BLANK
Please note the Linn base collar holes.
You will need drilling to suit your linn fitting.
Also, the Rega arm board can also be used with the new 3 point Rega mount- if You mark and drill the 3 extra holes.
14K Gold Plated Technics SL1200/1210 Arms at £1250.00
Postage: £5.50 UK or £20.00 worldwide.
Audio Origami has manufactured a cheap and lightweight 3D printed Headshell & Cartridge storage/transport case.
For Professional DJ’s and Audiophiles from around the world.
Keep your expensive headshell and cartridge SAFE whenever you travel or just store in your house or club.
Holds up to 2 cartridges of both technics headshells or Concorde cartridges etc.
Now available in 4 new Colours – Brown (Wood Colour), Silver, Blue, Black.
*** Please contact me with an order of Preferred Colour ***
Designed to carry 1-2 cartridges.
For Technics headshells.
Weight only 50g
3D printed outside case cosmetics do vary between samples.
Please be aware the plastic case is printed not moulded so the outside finish can vary.
Even the hinge is 3d printed on these boxes this helps make the box strong and lightweight.
Any questions please just ask!
Please Note: The headshells inside the boxes are not included in the sale. (Example Only)
Price £9.99 plus postage £4 UK £6 worldwide
Cartridge Headshell Shims (4 pack)
Cartridge headshell shims supplied are: 1mm, 2mm, 3mm and 4mm plastic shim to space your cartridge.
Ideal with very thin cartridges on technics arms etc, (comes in black or silver plastic, please let me know what colour)
Price = £5 plus postage – £2 UK or £4 worldwide
NEW AO PRODUCT FOR 2017
3D Printed
SPEAKER SPIKE FLOOR PROTECTORS
Will protect delicate floor surfaces and isolate sound because of the hollow internal braced lattice structure.
The discs have approx. 55% hollow and are superior in isolation to solid units and will stop marks from even the sharpest speaker stands.
Available in black/ silver /blue and brown colour for wooden floors
£14.99 per set of 8 FREE delivery in UK
You are looking at a pack of 4 Audio Origami PTA Plastic Spacers (shims) for VTA adjustment of Rega RB200/RB250/RB300 tonearms.
The 4 spacers (shims) you will receive are the following sizes:
1 mm – 2mm – 3mm – 4mm
These spacers/shims can be used separately or can be combined to obtain the perfect VTA for your tonearm/cartridge combination.
£5.00 + @2.00 UK Postage (£4.00 World-Wide)
HEADSHELL SPIRIT LEVELS
These new units are ideal for setting up any tone arm AZIMITH and VTF
Can be used on the Chassis as well as Platter for quick checks @ £8.99
They are so light you can rebalance your arm with one on, and leave it on!
FREE DELIVERY!!!!
NOTE: Do not confuse these Spirit Levels with the cheap/inferior units that can be seen on the likes of ebay etc.
These are high quality items that do the job right!
BOOSTER OIL TURNTABLE MAIN BEARING KITS
BOOSTER OIL PTFE turntable oil kit
NEW MAIN BEARING EXTRA SLIPPERY OIL KIT
Is your old bearing asking for new oil?
Has it evaporated?
Old oil simply drags any dirt and metal wear around with it.
When did you last replace yours?
Newer extra slippery oils available today, will bring back life, be quieter running…
And improve the sound of your turntable
TIGHTER BEARING = TIGHTER SOUND
NEW MAIN BEARING EXTRA SLIPPERY OIL KIT
* Anti-Wear Additive: anti-friction protection in high and low stress areas.
* Gives a quieter running bearing, with less vibration, less slap even on worn bearings.
* Synthetic Oil. Works with standard bearings and inverted type bearings.
* 2 grades available. (thick version is available both fantastic, try them)
* Booster has (PTFE) Added particles have been stated as having the lowest coefficient of static and dynamic friction of any solid. Received a rating of 0.02, the equivalent of wet ice on wet ice.
* Coats Bearing surfaces and contact points with slippery coating. Adds protection.
* Supplied in 1.8ml containers just the correct amount for most bearings.
BOOSTER OIL You need to try this!
WONDERFUL MID AND TOP END RANGE!
HEAR THE DIFFERENCE!
CLEANING KIT
Also included is a extra long bearing cleaning pad to clean out bearing dirt and grime, even in those hard to reach areas.
And 2 lint free cloths for polishing bearing shafts, cleaning out bearings, absorbs oil extremely well.
They are super soft and don’t rip when wet and leaves no fibres behind.
PLUS old oil remover sucker tool, this is a fantastic way to get your old oil out of bearings and spare fluid container
AUDIO ORIGAMI ALIGNMENT PROTRACTOR
This has got to be one of the easiest alignment protractors available…
Just line up the styli’s on the centre line and check the cartridge runs parallel to the horizontal lines.
ALSO INCLUDES STROBOSCOPE!
Extra tight fit on platter spindle ensures ultra accuracy.
EXTRA SLIPPERY OIL KIT comes with all the above!
Use in accordance to turntable manufacturer instructions…
Full protractor usage and main bearing oil replacement instructions are available on our web site.
£17.99 plus £2.00 p&p (UK) – (£3.00 worldwide)
PURE SILICON DAMPER PACKS
Large 20ml – pure Silicon – Damper Fluid
For hi-fi applications. Brand New on the market!
Used in Elite Rock for tone arm dampening plus SME arm damper units and other audio applications.
Supplied in large 20ml packets ready to pour, this has viscosity about 2 times as thick as water and is the purest available on the market today.
FREE CLEANING KIT
Also included is 2 Extra long wooden cleaning pads to clean out dirt and grime. Even in those hard to reach areas
And 2 lint free cloths for cleaning, absorbs oil extremely well and leaves no fibres behind.
Also included a old fluid removal tool, ideal for sucking up old fluid and spare fluid container
FREE AUDIO ORIGAMI ALIGNMENT PROTRACTOR
This has got to be one of the easiest to use alignment protractors available.
Just line up the styli’s on the centre line and check the cartridge runs parallel to the horizontal lines.
Extra tight fit on platter spindle ensures ultra accuracy.
EXTRA Silicon – damper fluid kit comes with all the above. WHY PAY MORE???
Use in accordance to turntable manufacturer instructions.
Full protractor usage instructions are available.
30-day money back Guarantee if unhappy with the products in any way
£17.99 plus £4.00 p&p (UK) – (£6.00 World-Wide)
LINN ORIGINAL BLACK OIL
Comes with full instructions and oil dropper.
OUT OF STOCK
VDH HEADSHELL LEADS MINUS CARTRIDGE BOLT SET
£20.00 + £2.00 P&P
VARIOUS LINN COMPONENTS FOR SALE
Email For Current Prices
This high quality die-cut foam, thick walled cardboard box is available and will will suit arms of up to 12″ long for transportation purposes.
The box comes with a foam top part (not pictured) at £25.00 + Postage.
UK Postage: £5.00
Worldwide: £15.00